Samsung ML-1640 Series Instrukcja Użytkownika Pobierz pdf (Strona 3)

SAMSUNG ML-2010 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 3

USA Sales: T 800.221.3516 F 888.791.9188

International Sales: T +1 631.590.1040 F +1 631.218.3285

www.summitechnologies.com

1) Place the cartridge with the handle facing away from

you. Remove the 2 screws on the left end cap. See

Figure 1

2) Gently pry off the left end cap. See Figure 2

3) On the front edge of the cartridge, there are two

screws, remove them. See Figure 3

4) Lift up and remove the waste chamber from the

cartridge. Make sure the tab on the right side slide out of

the slot. If you try to lift the cover off with out sliding the

tab out, it will break off. See Figure 4

5) Remove the two screws and wiper blade from the

waste chamber. See Figures 5 & 6

6) Clean out any remaining toner from the waste

chamber.

7) Re-install the wiper blade and two screws. Place the

waste chamber aside. See Figure 7

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

1 2 3 4 5 6 7 8 9

Brak uwag

Samsung ML-1640 Series Instrukcja Użytkownika Strona 3