Samsung SSA-S2000W Instrukcja Użytkownika Pobierz pdf (Strona 11)

3) Registration of PIN ONLY MODE 4) Registration of RF/PIN Combination MODE

(1) Apply 12VDC to the unit.

All 3 LEDs will be flashing along with a powered-up melody (do mi sol me

do..do mi sol do~).

(2) Press ‘0’,’3’,’ENT’ from the keypad. (PIN ONLY MODE)

(3) Enter 4~6 digit PIN+’ENT’ to register Configuration PIN then 4~6 digit PIN+

‘ENT’ to register for each subsequent User Access PIN at a time and then enter

the 4~6 digit PIN+’ENT’ (Configuration PIN) to complete the registration.

(1) Apply 12V DC to the unit.

All 3 LEDs will be flashing with a power-up melody.

(2) Press ‘0’,’5’,’ENT’ from the keypad. (RF/PIN Combination Mode)

(3) Present Master Card to register Master Card to the unit.

(4) The first 4~6 digit PIN becomes the Configuration PIN and the subsequent

4~6 digit PINs are registered as User Access PINs. Once all User Access PINs

have been registered, enter the Configuration PIN again to complete the

registration. (Please store the Configuration PIN for future changes.)

(5) Now, the Main Unit is entered into the normal operation mode with factory

defaulted settings.

(4) Present RF Card or enter 4~6 digit PIN number to register user access card

or PIN.

(5) Present Master Card to complete the registration

Please refer to 10. Summary Table of Commands for configuring functions

Caution

Configuration

User Access

Configuration PIN again to complete

the registration.

Master Card Master Card

9. Configuration of Operation Mode (2/2)

User Access Cards or PINs

1 2 ... 6 7 8 9 10 11 12 13 14 15

Brak uwag

Samsung SSA-S2000W Instrukcja Użytkownika Strona 11