
46 47
ENG
MISCELLANEOUS
Specifications
•
If PROTECTION appears on the display,
check whether the speaker terminal is shorted
and then turn on the unit
Product protection function
Heat protection
•
The protection function will come on if the main unit or power
transformer overheats.
"
" will appear in the display.
This function will come on :
- If speaker terminal is shorted
- If speaker cable is shorted If there is no problem when you turn
the unit on again after turning it off, PROTECTION mark will
disappear on the display and the unit will work properly.
Before calling for service
(cont’d)
GENERAL
Standby power consumption 0.9W
Power consumption Main unit 100W
Subwoofer 90W
Weight 5.8 kg
Dimensions (W x H x D) 430 x 145 x 350 mm
Operating temperature range +5°C~+35°C
Operating humidity range 10%~75%
FM TUNER
Frequency response 87.5~108.0MHz
Usable sensitivity 12dBf
S/N ratio MONO/STEREO 55/55dB
Distortion MONO/STEREO 0.3/0.8%
Stereo separation 30dB
Tuner output level 1kHz, 75kHz Dev
AMPLIFIER
Rated output 20Hz~20kHz/THD = 10%
Front speaker(left+right) 4 Ω 100W/CH
Center speaker 4 Ω 100W/CH
Surround speaker(left+right) 4 Ω 100W/CH
Surround back 4 Ω 100W/CH
Input sensitivity/impedance 450mV/47kΩ
S/N ratio (analog input) 80dB
Separation (1kHz) 60dB
FREQUENCY
RESPONSE
Analog input 20Hz~20kHz(±3dB)
Digital input/96kHz PCM 20Hz ~44kHz(±3dB)
VIDEO
OUTPUT
TV format NTSC/PAL
Input level/impedance 1Vp-p/75 Ω
Output level/impedance 1Vp-p/75 Ω
Video frequency response 5Hz to 10kHz(-3dB)
S/N ratio 60dB
SPEAKE
RS
Speaker system
Front / Surround , Surround back
Centre Subwoofer speaker
Impedance 4Ω x 6 4Ω 8Ω
Rated input 100W 100W 150W
Maximum input 200W 200W 300W
Dimensions (W x H x D)
210 x 1000 x 271 mm /169x300x129mm 450 x 221 x 234 mm 311 x 375 x 422 mm
Weight 11.8 Kg / 2.6 Kg 6.7Kg 13.6 Kg
S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES (Audio Engineering Society) guidelines.
Symptom
Check Remedy
There is no sound from
surround back speakers
• Are the surround back speakers
connected properly?
• Is the S.BACK(Surround Back)
selected to NONE in Speaker
Setup?
• Is Surround Mode set to EX/ES?
• Refer to pages 10~11 to connect it
properly.
• Refer to pages 20~21 to select
LARGE or SMALL.
• Refer to page 32 to set Surround
Mode to EX/ES.
Can't select EX/ES mode.
• Is S.BACK(Surround Back)
selected to NONE in Speaker
Setup?
• Is the input signal selected
properly?
• Refer to pages 20~21 to select
LARGE or SMALL.
• Use 7.1 channel external
component.
Can't select Dolby Pro
Logic llx mode.
• Is the input signal selected
properly?
• Select 2 channel Dolby Digital, PCM,
and Analogue input signal.
Can't select NEO:6 mode.
• Is the input signal selected
properly?
• Use PCM and Analogue input signal.
There is no sound when
playing a DTS encoded
DVD.
• Is Digital input selected? • Check whether the DVD player is
properly connected and refer to page
24 to select the digital input.
AV-R720-ENG-비유럽향.indb 46-47AV-R720-ENG-비유럽향.indb 46-47 2007-12-10 오후 5:24:142007-12-10 오후 5:24:14
Komentarze do niniejszej Instrukcji