Samsung ML55E Instrukcja Użytkownika Pobierz pdf (Strona 81)

Chapter 4. Remote control

Auto Turn Off

Setting an Anynet+ Device to turn Off automatically when the product is turned off.

• If Auto Turn Off is set to Yes, running external devices will turn off at the same time

as the product powers off.

• May not be enabled depending on the device.

Search for Devices

Switching between Anynet+ devices

1 Press the

TOOLS

button, select Anynet+ (HDMI-CEC), and then press .

2 Select Select Device, and then press the button.

If you cannot nd a device you want, select Refresh to refresh the list.

3 Select a device, and then press the button. You can switch to the selected

device.

• The Select Device menu appears only when you set Anynet+ (HDMI-CEC) to On

in the System menu.

• 

the switching operation while switching is in progress.

• If you have selected an Anynet+ device by pressing the

SOURCE

button and then

selecting its input source, you cannot use the Anynet+ function.

• Make sure to switch to an Anynet+ device by using the Select Device.

Troubleshooting for Anynet+

Problem Possible Solution

Anynet+ does not

work.

• Check if the device is an Anynet+ device. The Anynet+

system supports Anynet+ devices only.

• Check if the Anynet+ device power cord is properly

connected.

• 

connections.

• Check whether Anynet+ (HDMI-CEC) is set to On in the

System menu.

• Check whether the remote control is Anynet+

compatible.

• Anynet+ doesn’t work in certain situations. (initial

setup)

• 

cable, please make sure to search devices again or turn

your

• product off and on again.

• Check if the Anynet+ function of the Anynet device is

set on.

I want to start

Anynet+.

• Check if the Anynet+ device is properly connected to

the product and check if the Anynet+ (HDMI-CEC) is set

to On in the System menu.

• Press the

TOOLS

button to display the Anynet+ menu

and select a menu you want.

I want to exit Anynet+. • View PC in the Anynet+ menu.

• Press the

SOURCE

button on the product remote control



1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 109 110

Komentarze do niniejszej Instrukcji

Brak uwag

Samsung ML55E Instrukcja Użytkownika Strona 81

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Samsung ML55E