Samsung AQB24J2WC Instrukcja Instalacji Pobierz pdf (Strona 14)

E-

Fixing the Outdoor Unit in Place

Final Checks and Trial Operation

To complete the installation, perform the following checks and tests to ensure

that the air conditioner operates correctly.

1 Check the following.

◆ Strength of the installation site

◆ Tightness of pipe connection to detect a gas leak

◆ Electric wiring connection

◆ Heat-resistant insulation of the pipe

◆ Drainage

◆ Earth conductor connection

◆ Correct operation (follow the steps below)

2 Press the button for 5 seconds. Or press the K1 switch of the display board

twice(Cooling test operation) or 3 times(Heating test operation) after removing the side

cover of the outdoor unit.

◆ The LED of the indoor unit displays the option code.

◆ The airflow blade swings up and down and the indoor fan operates.

26(660)

Rubber leg

1 Place the outdoor unit as indicated on the top of the unit to let the discharged air out

properly.

2 Fix the outdoor unit to the appropriate support using anchor bolts.

3 If the outdoor unit is exposed to strong winds, install shield plates around

the outdoor unit, so that the fan can operate correctly.

You should install the outdoor unit on a stable base to avoid the generation of

noise and vibration, especially when installing the outdoor unit close to your

neighbor.

If you install the outdoor unit in a place exposed to strong winds or at a height,

you must fix it to the appropriate support (wall or ground).

➢ Secure the rubber leg in order to prevent the generation of noise and

vibration.

Unit : inch(mm)

Completing the Installation

AQB18J6WC_IM_E_25864 3/24/06 10:52 PM Page 14

1 2 ... 9 10 11 12 13 14 15 16

Brak uwag

Samsung AQB24J2WC Instrukcja Instalacji Strona 14