Samsung RSE8KPAS Dokumentacja Pobierz pdf (Strona 14)

Operating Instructions & Installation

3-1) Digital Panel

When the system power is initally engaged, the default set temperature are -20 for the freezer and 3 for the

refrigerator, respectively. The numbers shown on the digital display panel stand for the actual compartments

temperatures. When the compartment temperatures go down, so do the numbers on the display panel, and finally they

reach the set temperatures. Once the system is stabilized, the display temperatures are the set temperature.

1) Freezer Temperature Control.

To select a set temperature, press the “Freezer” Temp. button. The display shows the set temperature from -14 to

-25  in sequence.

2) Refrigerator Temperature Control.

To select a set temperature, press the “Fridge” Temp. button. The display shown the set temperature from 7 to

1 in sequence.

note) Because of the temperature sensor sensivity, the refrigerator can be under and/or over cooled when

the air flow is blocked by stored foods. (Temperature range of the sensor : -9





)

In the event of a power failure, if the freezer temperature is maintained lower than 5



the last

selected set temperature and functions memorized in EEPROM will be restored when the power is on.

note)

Interior Temperature of the freezer will be controlled with -25 until the ice bucket is filled up with ice cubes.

When the ice bucket is filled up with ice cubes, the freezer will run with original set temperature. Also, whenever

the ice bucket is released from being filled with ice cube, the freezer will repeat to be controlled with -25 . But if

you select "Ice Off, the freezer always will be controlled with original set temperature.

for RSE8F,D,N***

for RSE8K,J,V,T***

3-2) Temperature Control Function

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 89 90

Brak uwag

Samsung RSE8KPAS Dokumentacja Strona 14