Samsung SONOACE R3 Instrukcja Użytkownika Pobierz pdf (Strona 282)

User Manual

9-22

5. Insert the needle into the needle guide. Perform the puncture by sliding the needle through the

groove in the guide until the needle intercepts the target.

6. To keep the needle securely in the needle guide, press down on the top of the biopsy adapter with

your index nger.

7. When the examination location is reached, take the needle out of the needle guide.

8. Detach the needle guide, adapter and sheath from the probe.

9. Dispose of the components that are not designed for reuse.

Needle Guide Alignment

Alignment of the needle guide displayed on the system is for the purpose of verifying whether the needle

and the needle guide are properly installed. This must be done prior to the biopsy examination. Do not use

the needle guide if the needle is not following the intended path. Contact Samsung Medison Customer

Service Department for service.

Reverberation or other tissue artifacts may produce false needle images which can cause confusion. Ensure

the needle path is along the guideline, and that you are not using a false needle image to locate the needle.

WARNING:

X

The needle used for this alignment verification must not be used for the actual procedure.

Always use a new, sterile needle for each biopsy procedure.

X

To assist in accurate projection of the needle, use a straight, new needle for each alignment

procedure.

1. Attach the biopsy kit.

2. Set the system depth for the procedure to be performed and select the Biopsy menu.

3. Immerse the probe into the water bath, and insert the needle into the needle guide.

4. Conrm that the needle image is on the needle guidelines. If so, the needle guide is properly aligned.

5. If the needle image is out of the needle guideline, check the needle guide or the probe adapter.

1 2 ... 277 278 279 280 281 282 283 284 285 286 287 ... 441 442

Brak uwag

Samsung SONOACE R3 Instrukcja Użytkownika Strona 282